Welcome to Pomodoro Clock. The aim of this project is to build a CodePen.io app similar to https://codepen.io/freeCodeCamp/full/XpKrrW
On first load, the break length is 5 minutes. The session length is 25 minutes. When the timer is less than 61 seconds, the alarm colour changes to orange red. Break length from 0 minutes to 60 minutes. Session length from 0 minutes to 60 minutes. Alarm colours are white and orange red.
Taken from https://www.freecodecamp.org/learn/front-end-libraries/front-end-libraries-projects/build-a-pomodoro-clock
As a user, I can see an element with id=”break-label” that contains a string (e.g. “Break Length”).
As a user, I can see an element with id=”session-label” that contains a string (e.g. “Session Length”).
As a user, I can see two clickable elements with corresponding IDs: id=”break-decrement” and id=”session-decrement”.
As a user, I can see two clickable elements with corresponding IDs: id=”break-increment” and id=”session-increment”.
As a user, I can see an element with a corresponding id=”break-length”, which by default (on load) displays a value of 5.
As a user, I can see an element with a corresponding id=”session-length”, which by default displays a value of 25.
As a user, I can see an element with a corresponding id=”timer-label”, that contains a string indicating a session is initialized (e.g. “Session”).
As a user, I can see an element with corresponding id=”time-left”. NOTE: Paused or running, the value in this field should always be displayed in mm:ss format (i.e. 25:00).
As a user, I can see a clickable element with a corresponding id=”start_stop”.
As a user, I can see a clickable element with a corresponding id=”reset”.
As a user, When I click the element with the id of reset, any running timer should be stopped, the value within id=”break-length” should return to 5, the value within id=”session-length” should return to 25, and the element with id=”time-left” should reset to it’s default state.
As a user, When I click the element with the id of break-decrement, the value within id=”break-length” decrements by a value of 1, and I can see the updated value.
As a user, When I click the element with the id of break-increment, the value within id=”break-length” increments by a value of 1, and I can see the updated value.
As a user, When I click the element with the id of session-decrement, the value within id=”session-length” decrements by a value of 1, and I can see the updated value.
As a user, When I click the element with the id of session-increment, the value within id=”session-length” increments by a value of 1, and I can see the updated value.
As a user, I should not be able to set a session or break length to <= 0.
As a user, I should not be able to set a session or break length to > 60.
As a user, When I first click the element with id=”start_stop”, the timer should begin running from the value currently displayed in id=”session-length”, even if the value has been incremented or decremented from the original value of 25.
As a user, If the timer is running, the element with the id of time-left should display the remaining time in mm:ss format (decrementing by a value of 1 and updating the display every 1000ms).
As a user, If the timer is running and I click the element with id=”start_stop”, the countdown should pause.
As a user, If the timer is paused and I click the element with id=”start_stop”, the countdown should resume running from the point at which it was paused.
As a user, When a session countdown reaches zero (NOTE: timer MUST reach 00:00), and a new countdown begins, the element with the id of timer-label should display a string indicating a break has begun.
As a user, When a session countdown reaches zero (NOTE: timer MUST reach 00:00), a new break countdown should begin, counting down from the value currently displayed in the id=”break-length” element.
As a user, When a break countdown reaches zero (NOTE: timer MUST reach 00:00), and a new countdown begins, the element with the id of timer-label should display a string indicating a session has begun.
As a user, When a break countdown reaches zero (NOTE: timer MUST reach 00:00), a new session countdown should begin, counting down from the value currently displayed in the id=”session-length” element.
As a user, When a countdown reaches zero (NOTE: timer MUST reach 00:00), a sound indicating that time is up should play. This should utilize an HTML5 audio tag and have a corresponding id=”beep”.
As a user, The audio element with id=”beep” must be 1 second or longer.
As a user, The audio element with id of beep must stop playing and be rewound to the beginning when the element with the id of reset is clicked.
Wireframes are supplied.
Setting of break lengths and session lengths. Change of alarm color when timer is less than 61 seconds.
This project uses HTML5, Google Fonts, CSS3, React, Bootstrap 4.4.1 with Font Awesome 4.7.0. It uses the moment library (details at https://momentjs.com).
Ensure all user stories have been met. If not, go back and edit the code.
Go to directory pomodoro and type npm run build. To install the npm library of GitHub pages, use the command npm install gh-pages.
Add “deploy”: “gh-pages -d build” in the scripts of package.json.
Deploy on GitHub Pages
Icons taken from Font Awesome (v4.7.0).
Peter Weinberg including the Code Pen with the accurateInterval.
Also Max Morales including the Code Pen. Accessed on 19 May 2020.
